In everyday language, a stitch in the context of embroidery or hand-sewing is defined as the movement of the embroidery needle from the backside of the fabric to the front side and back to the back side. The thread stroke on the front side produced by this is also called stitch. In the context of embroidery, an embroidery stitch means one or more stitches that are always executed in the same way, forming a figure.
Embroidery stitches are also called stitches for short.
Embroidery stitches are the smallest units in embroidery. Embroidery patterns are formed by doing many embroidery stitches, either all the same or different ones, either following a counting chart on paper, following a design painted on the fabric or even working freehand.
Embroidery uses various combinations of stitches. Each embroidery stitch has a special name to help identify it. These names vary from country to country and region to region. Some embroidery books will include name variations. Taken by themselves the stitches are mostly simple to execute, however when put together the results can be extremely complex.
Straight stitches pass through the fabric ground in a simple up and down motion, and for the most part moving in a single direction. Examples of straight stitches are:
- Running or basting stitch
- Simple satin stitch
- Algerian eye stitch
- Fern stitch
Straight Stitches that have two journeys (generally forwards and backwards over the same path). Examples:
- Holbein stitch, also known as the double running stitch
- Bosnian stitch
Back stitches pass through the fabric ground in an encircling motion. The needle in the simplest backstitch comes up from the back of the fabric, makes a stitch to the right going back to the back of the fabric, then passes behind the first stitch and comes up to the front of the fabric to the left of the first stitch. The needle then goes back to the back of the fabric through the same hole the stitch first came up from. The needle then repeats the movement to the left of the stitches and continues. Some examples of a back stitch are:
- Stem stitch or outline stitch
- Split stitch – the needle pierces the thread as it comes back up
- Crewel stitch
Chain stitches catch a loop of the thread on the surface of the fabric. In the simplest of the looped stitches, the chain stitch, the needle comes up from the back of the fabric and then the needle goes back into the same hole it came out of, pulling the loop of thread almost completely through to the back; but before the loop disappears, the needle come back up (a certain distance from the beginning stitch -the distance deciding the length of the stitch), passes through the loop and prevents it from being pulled completely to the back of the fabric. The needle then passes back to the back of the fabric through the second hole and begins the stitch again. Examples of chain stitches are:
- Chain stitch
- Lazy Daisy stitch, or detached chain. The loop stitch is held to the fabric at the wide end by a tiny tacking stitch.
- Spanish Chain or Zig-zag Chain
Buttonhole or blanket stitches also catch a loop of the thread on the surface of the fabric but the principal difference is that the needle does not return to the original hole to pass back to the back of the fabric. In the classic buttonhole stitch, the needle is returned to the back of the fabric at a right angle to the original start of the thread. The finished stitch in some ways resembles a letter “L” depending on the spacing of the stitches. For buttonholes the stitches are tightly packed together and for blanket edges they are more spaced out. The properties of this stitch make it ideal for preventing raveling of woven fabric. This stitch is also the basis for many forms of needle lace. Examples of buttonhole or blanket stitches.
- Blanket stitch
- Buttonhole stitch
- Closed buttonhole stitch, the tops of the stitch touch to form triangles
- Crossed buttonhole stitch, the tops of the stitch cross
- Buttonhole stitches combined with knots:
- Top Knotted Buttonhole stitch
- German Knotted Buttonhole stitch
- Tailor’s buttonhole stitch
Cross stitches or cross-stitch have come to represent an entire industry of pattern production and material supply for the craft person. The stitch is done by creating a line of diagonal stitches going in one direction, usually using the warp and weft of the fabric as a guide, then on the return journey crossing the diagonal in the other direction, creating an “x”. Also included in this class of stitches are:
- Herringbone stitches, including the hem stitch
- Breton stitch, here the threads of the “x” are twisted together
- Sprat’s Head stitch
- Crow’s Foot stitch, these last two stitches are often used in tailoring to strengthen a garment at a point of strain such as a pocket corner or the top of a kick pleat.